Platters, mugs, and cannisters

I recently had a large batch of pottery items I made - some to fill customer orders and others to restock my supply of items to be sold at art and craft shows. I'm now done with the shows for the year, so it is nice to kick back a little and have things be more relaxed. I'd like to see if I can make enough wares this winter to allow me to not have to make as much during the busy selling season.

Here's a look into the latest kiln load after a glaze firing. There were lots of coffee mugs in this load, along with some new designs of cannisters that I hope will sell well this coming year. Let me know if you have any suggestions for items to make. :D

This large platter was made using a slab of clay slumped into a mold, then a foot ring added to the back by using the potters wheel. It has holes punched through the foot ring so that wires can be used to hang it on the wall as a decorative piece. It is fairly large (approx 19" across), and is about as large a piece as I can fire in the larger electric kiln I own.

These 'soldiers' were going to be egg cups for soft boiled eggs, but there are too small in diameter, so I think I will find some nice little candles for them and they can become candle holders.

Here is a large coffee mug I made for my brother's birthday this past weekend. He likes to drink coffee, so I hope he will enjoy using it.

The following photo shows a large platter for an order I am filling to create pieces for a lady's wedding. She wanted the darker blues because she is marrying a military man.

Here's another look at the large platter with the thrown foot.

This rectangular tray was made using some very fancy lace rolled onto a slab, then formed in a mold to give it the curve. There are four short plugs for feet attached to the bottom. I wanted to show off the decoration, so after dipping it into the glaze, I wiped off most of the glaze from the surface, leaving the remaining glaze to highlight the lace design.

Here is a close up look at some of the lace design on the tray.

I like the look and shape of this coffee mug. Makes one want to sit back and relax with a hot cup of tea perhaps?!?!

These two cups were experiments in decorating. I'm always trying to find the right combination to make things interesting. :D

I carved some designs into the sides of the following cups. The one on the left was just made up as I went, while the one on the right is suppose to represent a flower.

Here's a look at the other side of the two cups.

Another couple of cups with some interesting glaze combinations on them.

The two coffee mugs in the following photo were done as a custom order for a lady who wanted initials on them to have one for herself and one for her friend.

I tried many new glaze combinations to see what would look good. I like to experiment when I get a chance, as one never knows what glazes will do when tried many different ways.

This lumpy tumbler actually is easy to grasp. Some people like the randomness of the shape rather than the symmetrical shape of the traditional tumbler.

This photos shows one of the recent covered cannisters I made. I plan to attach a rope handle through the two hoops you see on the sides of the cannister. The clay I used to make this piece was rolled very thin, so this cannister is actually very light in weight, but still rather large.

This cannister was made using a thicker slab that was then textured using the lace decoration shown earlier on the tray. I used a white glaze to help highlight the decoration.

This luminary was actually created by an accident using the slab roller. The ribs of the luminary were created when a stiffer piece of clay 'jumped' as it was rolled along with a softer piece of clay through the slab roller. After seeing the result, I just had to make a luminary out of it. Can I recreate it? Perhaps, but most likely not.

Let me know your thoughts and ideas, as I'm always asking people there opinions and thoughts on things to make. I will try to keep posting photos here so you can enjoy seeing what I've been making. And let me know if you have any questions, as they are always welcome too! :D Happy Holidays!!!!